Global Refrigeration Solutions
- Skip to Content
- +44 (0)1473 890522
- Home
- +44 (0)1473 892345
- Environment
- enq@hubbard.co.uk
- Downloads
Multi Compressor Packs
Hubbard multi-compressor packs are usually produced on one of three frame systems, the Armadillo configurable frame, the two-tier rack frame or the slimline low-noise housing. All frames are designed to provide a convenient footprint and have been laid out with ease of maintenance and accessibility in mind.
Hubbard packs are designed and produced at our Otley factory; standard product is manufactured within our batch build facility and customer-specific product is produced within our special-build facility. All our assemblers are trained to a high level and all product is manufactured in line with all pertinent regulations / guidelines and is tested / certified in line with the requirements of the Pressure Equipment Directive.
Our underlying design ethic drives us to design the best solution for the end-user; while considering the contractors requirements we will always strive to offer the most energy efficient solution available. We will generally select equipment from the Energy Technology List where this is available and are always considering new products and concepts as these are proved. Current solutions of this type include digital-scroll compressors, inverter controlled compressors and Enhanced Vapour Injection compressors; many of these qualify for Enhanced Capital Allowance, providing an immediate tax benefit for the end user and all have a proven track record reducing energy consumption and the carbon footprint of the refrigeration system.
Armadillo frames:
- Copeland scroll compressors, ZB15 - ZB45 HT or ZF09 - ZF18 LT
- 2 - 10 compressors
- 6.5 - 100kW HT, 4 - 42kW LT
- 700mm deep frame can be located against a wall and serviced from the front
- Integral or remote receiver
- Digital scroll lead compressors
- Enhanced Vapour Injection compressors
Two-tier rack frame:
- Bitzer reciprocating compressors
- Bock reciprocating compressors
- Bock inverter controlled lead compressor
- 3 - 6 compressors
- 75 - 150kW HT, 25 - 50kW LT
- Engineer-friendly compressor/fan removal system
- Remote receiver set for location and connection on site
Slimline housings:
- 600mm deep housing can be located against a wall
- Noise levels c. 30dB @ 10m
- Copeland scroll compressors, ZB15 - ZB45 HT or ZF09 - ZF18 LT
- 2 - 10 compressors
- 6.5 - 100kW HT, 4 - 42kW LT
- Integral or remote receiver
- Integrated attenuated cooling fan
- Digital scroll lead compressors
- Enhanced Vapour Injection compressors
General specification
- Designed and manufactured in line with all pertinent regulations and guidelines
- Tested and certified in line with Pressure Equipment Directive
- All frames finished in robust grey electrostatically applied oven hardened finish
- Integrated control panel
- Low voltage control circuits where possible for enhanced engineer safety
- Customer specified controller
- Standard controllers include Carel, RDM & Tektroniks
- Integrated back-up system
- Pipework design support
- On-site commissioning support
- Fast delivery, especially on standard product
- Full range of associated condensers and evaporators including low-noise versions for sensitive sites
Contact details
To find out more about this particular product range, please use the contact details below to speak directly to our experts.
Tel: 01473 892289
Relevant downloads
Relevant links
Other relevant Commercial Cooling ranges
- Transport
- About Transport
- Solutions
- Support
- Panel van
- Box body
- Truck / trailer
- Transport News
- X-Assistance Maintenance Management
Hubbard Products Ltd, Hillview, Church Road,
Otley, Ipswich, Suffolk, IP6 9NP
Registered in England No. 6217134
